BACKLOADING: GOOD OR BAD? (PART THREE)

February 10, 2014 AdminLeave a comment

HOW TO OBTAIN BACKLOADS Within the context of Nigeria, several yet untapped opportunities abound for any company interested in finding backloads for empty or partially laden return journeys. Operators can maximise the utilisation of returning vehicles by developing or becoming part of a business partnership that shares knowledge of load and vehicle locations, thus enabling them to be matched. General […]

BACKLOADING: GOOD OR BAD? (PART TWO)

February 10, 2014 AdminLeave a comment

REASONS FOR BACKLOADING The unethical drivers’ practices facilitated by the empty or partially loaded space on vehicles as earlier enumerated is one clear reason why haulers should formally embrace backloading. The question is why would you create opportunity for leakages or breaches that can be commercial harnessed for the overall financial benefit of your organisation? Or simply put, why leave […]

BACKLOADING: GOOD OR BAD? (PART ONE)

February 10, 2014 AdminLeave a comment

INTRODUCTION A haulage practitioner narrated his ordeal: A truck in his fleet had been dispatched for a delivery of 30ton cargo in Uyo in Akwa-Ibom State three (3) days earlier. That sunny afternoon, while going through the exception report from the Tracking Department, he discovered that the referenced truck had disappeared from the tracker the night before. Other reports confirmed […]

LOCALLY-ASSEMBLED VEHICLES TO GET SPEED LIMITERS

As part of efforts to reduce the rate of speed-related accidents in Nigeria, the National Automotive Development and Design Council has directed all vehicle manufacturing plants in the country to install the speed-limiting device in their vehicles.
A deadline for compliance on the installation of the device in all vehicles being imported into the country has also been given.
AUTO POLICY CAUSING HIGH MARITIME JOB LOSSES – EXPERT

In a letter to President Muhammadu Buhari, a member of the Presidential Taskforce on Customs Reform, Mr. Lucky Amiwero, has called on the Federal Government to review the policy, due to its negative impact on the economy.
He said, “The impact associated with the implementation of the auto policy is as follows: the diversion of cars carrying vessel to neighbouring West African ports as a result of high tariff on imported vehicles; and the reduction of the maritime workforce by 70 per cent, which affects mostly licensed customs agents, importers, dealers and Nigerians abroad.”
UNDERSTANDING THE HISSING & SQUEAKY SOUND FROM TRUCKS

Ever wondered why trucks and buses make funny squeaking and hissing sounds? Well, the squeaking is the air escaping after braking and the hissing sound is the automatic bypass safety valves at work, ensuring the air pressure remains at the correct level.
Since a main advantage of air-brakes systems is their ability to use air to operate, the compressor is constantly kicking on and kicking off to refill the reservoirs with pressurized air. When the compressor builds too much air, the valves open, producing that loud hiss which probably gets some of us wondering…What the heck is leaking..lol!
SAFETY TIPS! COPING WITH POTHOLES

Hitting potholes can throw your vehicle\'s front end out of alignment. If you feel your car \"pulling\" during driving, that\'s a clue that you could have a problem.

Check the tread on your tyres. Uneven tread wear can be a sign of misalignment. If you hit a severe pothole, have the vehicle\'s alignment and tyre balance checked.

When you hit a pothole you can damage your tyre and/or the metal wheel of your vehicle. Keeping your tyres properly inflated will help reduce damage from potholes and other road hazards.

The impact of potholes on tyres increases dramatically with speed and can cause hidden, internal damage that could lead to tyre failure weeks, or even months, later. It\'s best to avoid potholes entirely, but if that\'s not possible, don\'t brake during the pothole impact. Instead, apply brakes before hitting a pothole and release them just before impact. Braking during the impact sets up the tyre and wheel assembly for a \"solid hit\" against the edge of the hole. Less severe damage occurs when a tyre is rolling than when it is skidding over a hole during braking.

M	T	W	T	F	S	S
« Sep
				1	2	3
4	5	6	7	8	9	10
11	12	13	14	15	16	17
18	19	20	21	22	23	24
25	26	27	28	29	30

Haulage Report Now

Tag: Backloading

BACKLOADING: GOOD OR BAD? (PART THREE)

BACKLOADING: GOOD OR BAD? (PART TWO)

BACKLOADING: GOOD OR BAD? (PART ONE)